In Stock

Analog and digital tachographs up to Smart tachographs (Annex 1C / GEN-2) Tachograph programmer Tacho Programmer CD400 Blue Color with Digital Tachograph

Tachograph programmer (Tacho) CD400 blue is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer.

Quick Details

Size: 150 x 100 x 45 mm
Supply voltage: 9 to 30 VDC
Supply current: 12mA
Weight: 155g
Send an inquiry

Request Product Quote

    [dynamictext* your-subject "CF7_get_post_var key='title'"]


    Compare

    Description

    Tachograph programmer Tacho Programmer CD400 Blue Color with Digital Tachograph Analog and digital tachographs up to Smart tachographs (Annex 1C / GEN-2)

    Basically, a tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.
    The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver.Tacho Programmer QC MARK
    The Tachograph programmer CD400 blue calibrates and programs all analogue and digital tachographs.

    Supported Tachographs:

    Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
    Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
    A Workshop Card is required to calibrate the digital tachographs

    Tachograph Programmer CD400 blue Functions

    W figure determination on measuring track (with optional photo-cell) or rolling road.
    K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
    Parameter programming.
    Activation and deactivation of IMS (Independent Motion Signal).
    Activation and deactivation of VDO counter.
    Odometer reset and adjustment (mileage correction).
    Speed simulation and customizable automatic test diagram.
    DTCS reading (Digital) and erasing.
    Sensor pairing (KITAS activation).
    Clock test.
    Workshop card’s PIN recording and input through CD400 blue.

    Tacho CD400 blue Advantages:

    No power connection nor battery charging required, the only tester powered by the tachograph itself.
    Compact size, the smallest tachograph tester on the market.
    User friendly, clear 4 lines menus, no training required.
    Automatic tachograph model detection on power on.
    Double accuracy of the W factor measure on track by detecting half pulses.
    The only tester being able to reset the Odometer and change the sender type on the VR2400.
    Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

    Tachograph CD400 blue Technical Specifications:

    Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)
    White LED backlight
    Size: 150 x 100 x 45 mm
    Supply voltage: 9 to 30 VDC
    Supply current: 12mA
    Case: green-blue ABS (IP40).
    Operating temp: -20…+70°C
    Weight: 155g

    Package included:

    1pc x CD400 – tacho programmer
    1pc x Cable for 1319
    1pc x Cable for 13ХХ/1318, V.Root 8400
    1pc x Cable for EGK-100
    1pc x Cable for 1324
    1pc x Cable for V.Root 2400
    1pc x Cable for CA-RS232-1
    1pc x Cable for digital tacho
    1pc x Manual

     

    Contact us:

    Please Make Sure You Leave A  Message At The End of  Email below for Fast Response or Reply.
    And if nobody answers you online, sometimes, do not worry, leave us a message or write your desires, we will contact you as soon as possible. , We Will GET Back to you immediately.
    Thanks for your Understanding.

    Contact us:

    Our office hours:

    Am8: 30-PM11: 00

    Contact Information.
    Live Support: Chat with us online

    Email: txsglobalstore@zoho.com
    Sales@txsglobalstore.com

    For Direct Live Chat: Visit Us @

    www.txsglobalstore.com