In Stock

Subaru Select Monitor III (Subaru SSMIII)

OEM Sabaru SSMIII is a powerful fault diagnosis device that has been developed using the latest advanced technology. Used in combination with a PC, it provides a tool for quick and efficient analysis of vehicle faults.

Weight: 2.50 Kg

Send an inquiry

Request Product Quote

    [dynamictext* your-subject "CF7_get_post_var key='title'"]



    Subaru Select Monitor III (Subaru SSM III)

    The OEM SSMΙΙΙ is a powerful fault diagnosis device (for for Subaru vehicles) that has been developed using the latest advanced technology. Used in combination with a PC, it provides a tool for quick and efficient analysis of vehicle faults.

    Application software running on a PC provides an interactive user interface for very simple operation. High-speed communication with the engine control system and transmission control system help to make checking of various phenomena faster than ever before.

    The SSMΙΙΙ is a fault diagnosis device that provides a standard means of automotive fault diagnosis. It communicates with the various system control modules equipped in a vehicle to monitor control module input/output data, and to allow checking and deletion of diagnostic codes generated by the controlmodule. It also provides means to reset control module learning values and other control parameters, and to force operation of engine control system actuators.
    – All System Diagnosis. Selecting this item displays on a single screen the fault detect status of all control system control modules for which SSMΙΙΙ diagnosis is supported, and memorized diagnostic codes.
    – Each System Check. Selecting this item makes it possible to select a particular system from among the control systems forwhich SSMΙΙΙ diagnosis is supported, and perform fault diagnosis. This item can be used to view input/output data of the system control modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display. This menu item is also used after repair work is complete to delete diagnostic codes, to configure control module settings, etc.
    – Saved Data Display. This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete.
    – Immobilizer. This item performs immobilizer registration.
    – Reprogram. This item performs reprogramming of the control module.
    – Read CF application measurement data. This item performs reading stand alone measurement data saved in a CF card to hard disk of your PC.
    – Convert/Save measurement data on driving recorder. Loads data sampled on the driving recorder to the PC from the CF card, and converts and saves that data.
    – Oscilloscope. After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling.
    Minimum Computer Operating Requirements:
    Operating System: Microsoft Windows 2000/XP
    CPU: Intel Pentium M processor; 900 MHz equivalent or higher recommended
    RAM: 256 MB recommended
    Available Hard Drive Capacity: 20 GB recommended
    Drive: CD-ROM drive
    Communications Port: USB port (USB 1.1 or higher)
    The SSMΙΙΙ supports five languages: English, French, German, Spanish and Japanese.
    Supported cars: for Subaru.
    Compatible software:
    Subaru SSM 3 (III)
    Specifications for AllScanner software:
    ALLScanner with Honda GNA600
    -Honda GNA600 software version: V3.18; Updated available in future
    -Year covered: 1996 to now.
    -Car covered: All the Honda and Acura
    -Languages supported: English, Chinese Simple, Chinese Traditional, Spanish, French(standard), Indonesian, Korean, Portuguese
    1. Can be installed into any of laptop and PC
    2. DTC reading and clearing (allows the user to read both permanent and temporary DTCs. Once the fault causing the DTC has been found and repaired the DTC tool can then be used to clear DTCs.)
    3. Snapshot function (capture data relative to a trigger event)
    4. Vehicle data display (value, line graph, or bar graph formats)
    5. Data list display (real-time display of ECU parameters)
    6. System Functional Tests (allows for more detailed testing of specific parts of the vehicle systems, where the ECU support these tests (e.g. Window movement, Lighting, Vehicle Gauges and engine components)).
    7. Onboard tutorial
    8. Immobiliser
    9. Odometer Rewrite
    10. Immobilizer cancellation function

    Standard package:
    ALLScanner for Honda package without wireless

    Standard Packing list:
    VCX main interface    X1pc
    OBD2 diagnostic cable   X1pc
    USB communication cable   X1pc
    VCX driver installation Disc  X1pc
    Original sofware installation Disc  X1pc
    Allscanner carry case   X1pc
    More compatible softwares for optional:
    1. Toyota techstream TIS
    2. Volvo VIDA DICE
    3. Subaru SM3
    4. Ford VCM IDS
    5. BMW DIS
    6. MB STAR Xentry ( Pending)
    More OEM software support in future…
    Above softwares can be optional. You can choose the softwares you needed mixed into AllScanner pacakge. More details, pls refer other products’ specification
    Package includes:
     SDI Box
     CF Card
     USB cable
     Diagnostic cable
     A/C Adapter
     Carrying Case